Lenis Operating Room Table (Lenis Surgical Table)

Features opration table LENISOperating Table) Lenis

• Equipped with a five-section, five-articulated tabletop.
• All joints and connections are made of non-magnetic 304L stainless steel.
• Equipped with a tabletop featuring a carbon fiber surface, providing excellent radiolucency for high-quality radiographic imaging.
• Equipped with an X-ray cassette holder.
• Equipped with four IPX6-rated electric actuators for electrical positioning.
• Equipped with a backup battery for operation during power outages.
•  Equipped with two floor-lock mechanisms featuring a nanocomposite coating with antistatic, antibacterial, and hydrophobic properties.
• Equipped with four casters.
• Equipped with a foot pedal for activating the floor-locking system.
• Equipped with a washable hand control unit featuring ON/OFF functionality for adjusting all electrical positioning functions.
• Equipped with a gas spring for vertical adjustment of the head section within a +45° angle range.
• Equipped with a gas spring for vertical adjustment of the leg section within an angle range of +45° and -90°.
• Equipped with a wing screw for horizontal adjustment (abduction) of the leg section.
• Equipped with an anti-static mattress.
• The head and leg sections are interchangeable, allowing the table to be converted into a C-ARM configuration for lower extremity (legs) and hip procedures.
• The base is designed with an optimized structure suitable for laparoscopic surgical procedures.
• The head and leg sections can be easily detached using quick-release locking buttons.
• Equipped with the capability to attach an anesthesia screen support pole.
• The floor-lock pads are coated with a nanocomposite layer featuring antistatic, antibacterial, and hydrophobic properties.
• Equipped with attachment points for non-magnetic AISI 304L stainless steel lithotomy leg supports.
• Equipped with attachment points for non-magnetic AISI 304L stainless steel lithotomy leg supports.
• Equipped with provisions for attaching a headrest.

Introduction to the LENIS Operating Room Table (LENIS Surgical Table)

Dimensions of the LENIS Operating Room Table (LENIS Surgical Table)

• Overall dimensions of the table: 600 × 2174 × 750/1050 mm
• Height adjustment: 750–1050 mm (±3 mm)
• Back section angle: +70° / −35°
• Head section movement: ±45°
• Tilt angle: ±20°
• Trendelenburg / Reverse Trendelenburg angle: ±30°
• Maximum patient weight capacity: 200 kg
• Table weight: 250 kg

Standards of the LENIS Operating Room Table (LENIS Surgical Table)General Surgical Table) Lenis

• IEC 60601-1
• 60601-2-46 IEC
• 60601-2-52 IEC
• ISIRI 3368-2-52
• ISIRI 3368-2-46
• ISIRI 3368-1